All Products

Displaying 331 to 340 (of 367 products)

<< Prev ... 31 32 33 34 35 ... Next >>

LED Transformer - Waterproof Power Supply - 24V DC - 8.3A - 200W

Part Number: PS-WP24LPS200

Input Voltage: AC 100~240V, 50/60Hz
24 Volt DC
8.3 Amps (8300mA)
200 Watt (Max.)
Protection Rating IP68
Working Temperature: -10℃~60℃
Efficiency: 85% (Typ.)
Metal Housing
Size: 231 x 120 x 50mm
CE and FCC Approved

Starting at $59.99

Back-Pin Tower T3 JC G4 LED Bulb, 4.8 Watts, 30-35W Equivalent, 5-Pack

Part Number: BTG4-24T

Input voltage is AC10-18V / DC10-30V
Power consumption is 4.8Watts
Uses 24 pcs SMD 5050 LEDs
Luminous flux up to 350 lumens maximum
Nearly equivalent to standard 30-35W halogen/incandescent bulb
Optional colors are cool white, daylight white and warm white
360 degree wide beam floodlight
Not dimmable
0.75 inch diameter x 1.73 inch total length
For use in ceiling lights, pendant lights, desk lamps, table lights, puck lights, under-counter lights, closet lights, under-cabinet lights, accent lights or display lighting etc.
The package includes 5 pcs bulbs
Non-Weatherproof. Indoor use only unless contained within weatherproof housing.
Oversize. Will not fit all fixtures. Please check the bulb dimension.

Starting at $19.99

... more info

High Power LEDs - 3W - Red - 10-Pack

Part Number: HL-3W-R

DC Forward Current: Typ. 700mA ( 0.7A )
DC Forward Voltage: 2.0V Min. ~ 2.8V Max. ( 2.2V Typ. )
Power Consumption: 3.0 Watts
Emitting Color(s): Red rated at 625nm
Luminous Flux up to 80 Lumens
View Angle of Half Power is 120 Degree
Operation Temperature: -20℃ ~ 50℃
Storage Temperature: -20℃ ~ 100℃
Soldering Temperature: 260℃ within 5 Seconds
Additional Heatsink is required when operation temperature is higher than 50℃
Additional aluminum heatsink and fans work together to make leds perform better
Extra Constant Current LED Driver is required to drive the LED
Please install and operate the LED as per specifications and instructions
Damage from improper installation or abuse will invalid warranty
Qualified electricians who are familiar with LEDs are highly recommended
The package includes 10 pcs LEDs.

Starting at $15.95

IR Remote Controller for Wireless Induction Rechargeable Tea Light Votive Candles

Part Number: CD-RF-CT

Power by 1pc cr2025 3v lithium battery (NOT INCLUDED)
Turn on/off led candles
4-hour or 8-hour time setting
Flickering led candle or static led light setting
60% or 100% 2-level brightness setting
Compact size 88*33*6mm
CE and RoHS Compliant

Starting at $3.95

... more info

TRIAC/Phase-cut Dimmable LED Driver Transformer - Dimmable LED Power Supply - Constant Voltage - 12V DC - 5A - 60W

Part Number: PS-12LPS60-WL

Input: AC 100-277V (±0.5V), 50/60Hz.
Output: 12 Volt DC, 5 Amps, 60 Watts.
Dimensions: 300*32*20mm (L*W*H).
Efficiency: 83% (Typ.) @ full load.
Power Factor: 0.98 @120V AC, 0.98 @277V AC.
Working Temperature: -40～60 degrees centigrade.
Working Humidity: 20～90%RH, non-condensing.
Storage Conditions: Temperature -40～80 degrees centigrade，Humidity 10～95% RH.
Short Circuit: Shut down o/p voltage, re-power on to recover after fault condition is removed.
Over Loading: ≤120% shut down o/p voltage, re-power on to recover.
Over temperature: 90～110 degrees centigrade shut down o/p voltage, automatically recover after cooling.
TRIAC/Phase-cut Dimmable Constant Voltage 12V DC LED Driver.
Full protection enclosed metal housing.
Certificates: UL, cUL, Class 2 and FCC approved.
Wiring Instructions: Black wire for AC L, White for AC N, Green for Ground; Red for LED +, Blue for LED - .

$79.95

LED Transformer - Switching Power Supply - 12V DC - 8.3A - 100W

Part Number: PS-SW12LPS100

Input Voltage: AC 110~220V, 50/60Hz
12 Volt DC
8.3 Amps (8300mA)
100 Watt (Max.)
Protection Rating IP20
Working Temperature: -10℃~50℃
Efficiency: 85% (Typ.)
Metal Housing
Size: 200 x 92 x 37.4mm
CE, RoHS and FCC Approved

Starting at $29.95

Tail Cap for 3528 SMD LED Rope Light

Part Number: CM-RP-TC3528

Tail Cap for 3528 SMD Rope Light
Price is for 1pc quantity

$0.10

End Cap for 5050 SMD LED Rope Light

Part Number: CM-RP-TC5050

Tail Cap for 5050 SMD Rope Light
Price is for 1pc quantity

$0.20

RGB Power Wire - Four Conductors - 10m (32.8ft)

Part Number: LS-WRGB-10M

Conductor Standard: 4 Cores
Conductor Quantity: 1 Pc(s)
Wire Diameter: 1.5mm x 7mm
Wire Length: 10M (32.8 ft.)
Maximum Load Current: 3.0 Amps
Maximum Voltage: 240 Volt

$8.99

10.

Side Pin T3 JC G4 LED Bulb, 1.2 Watts, 10W Equivalent, 5-Pack

Part Number: SG4-6T

Input voltage is AC10-18V/DC10-30V
Power consumption is 1.2 Watts
Uses 6 pcs SMD 5050 LEDs
Luminous flux up to 120 lumens maximum
Nearly equivalent to standard 10W halogen/incandescent bulb
Optional colors are cool white, daylight white and warm white
120 degree wide beam floodlight
Not dimmable
0.94 inch diameter x 1.45 inch total length
For use in ceiling lights, pendant lights, desk lamps, table lights, puck lights, under-counter lights, closet lights, under-cabinet lights, accent lights or display lighting etc.
The package includes 5 pcs bulbs
Non-Weatherproof. Indoor use only unless contained within weatherproof housing.

Starting at $12.99

... more info

Displaying 331 to 340 (of 367 products)

<< Prev ... 31 32 33 34 35 ... Next >>

Navigation

Account

All Products

LED Transformer - Waterproof Power Supply - 24V DC - 8.3A - 200W

Back-Pin Tower T3 JC G4 LED Bulb, 4.8 Watts, 30-35W Equivalent, 5-Pack

High Power LEDs - 3W - Red - 10-Pack

IR Remote Controller for Wireless Induction Rechargeable Tea Light Votive Candles

TRIAC/Phase-cut Dimmable LED Driver Transformer - Dimmable LED Power Supply - Constant Voltage - 12V DC - 5A - 60W

LED Transformer - Switching Power Supply - 12V DC - 8.3A - 100W

Tail Cap for 3528 SMD LED Rope Light

End Cap for 5050 SMD LED Rope Light

RGB Power Wire - Four Conductors - 10m (32.8ft)

Side Pin T3 JC G4 LED Bulb, 1.2 Watts, 10W Equivalent, 5-Pack