All Products

Displaying 321 to 330 (of 370 products)

<< Prev ... 31 32 33 34 35 ... Next >>

4-Pin Connector for 5050 SMD LED Rope Light

Part Number: CM-RP-PIN5050

4-Pin Connector for 5050 SMD Rope Light
Price is for 1pc quantity

$0.20

Dimmable Driver for 50W LED - 1500mA - DC 30-36V

Part Number: HL-50W-DIMLD

Input Voltage: AC 100~240V, 50/60Hz
DC 30~36V (Max.)
Output Current: 1500mA (Max.)
50 Watt (Max.)
Protection Rating: IP67
Working Temperature: -10℃~50℃
Efficiency: 85% (Typ.)
Fire-proofing Material
Size: 157mm x 50.3mm x 26mm
CE, GS, TUV and UL Approved
Can run 1 pc 50W LED

Starting at $39.95

10M 32.8FT - 2x 5M LED Strip Lights - 24V DC - 72W - IP33

Part Number: 5M300TAD-24V

10mm Wide x 5000mm Long x 2mm Height
Input Voltage is 24V DC
Total Power Consumption is 72 Watt (3.0 Amp)
Uses 300pcs Tri-chip 5050 SMD Epistar LEDs
Luminous Flux up to 5400 Lumens
Optional Colors: Warm White, Neutral White and Daylight White
Can be dimmable by our led dimmers (plus extra transformers)
Flexible Led Strip Lights
Self Adhesive Scotch Tape On the Back
Cuttable,but not encouraged,cuz improper use invalid warranty
Protection Rating is IP33 Nonwaterproof
The Maximum Length in series can ONLY be 5 meters (16.40 ft.).
Extra LED Transformer is required to drive the led strip (using correct voltage)

Starting at $52.99

... more info

High Power LEDs - 1W - Red - 10-Pack

Part Number: HL-1W-R

DC Forward Current: Typ. 350mA ( 0.35A )
DC Forward Voltage: 2.0V Min. ~ 2.8V Max. ( 2.2V Typ. )
Power Consumption: 1.0 Watts
Emitting Color(s): Red rated at 625nm
Luminous Flux up to 45 Lumens
View Angle of Half Power is 120 Degree
Operation Temperature: -20℃ ~ 50℃
Storage Temperature: -20℃ ~ 100℃
Soldering Temperature: 260℃ within 5 Seconds
Additional Heatsink is required when operation temperature is higher than 50℃
Additional aluminum heatsink and fans work together to make leds perform better
Extra Constant Current LED Driver is required to drive the LED
Please install and operate the LED as per specifications and instructions
Damage from improper installation or abuse will invalid warranty
Qualified electricians who are familiar with LEDs are highly recommended
The package includes 10 pcs LEDs.

Starting at $8.95

RGB LED Strip Connector - 4 Contacts - 10mm - Connect Clamp - 20-Pack

Part Number: LS-CNTRGB-D

Use this to connect our cut-off LED strips.
Perfect to use as corners or to change direction of the strip.
No soldering required - just push it on to make the connection.
Comes without wires.

$12.99

Back-Pin Tower T3 JC G4 LED Bulb, 3.6 Watts, 20-25W Equivalent, 5-Pack

Part Number: BTG4-18T

Input voltage is AC10-18V / DC10-30V
Power consumption is 3.6Watts
Uses 18 pcs SMD 5050 LEDs
Luminous flux up to 250 lumens maximum
Nearly equivalent to standard 20-25W halogen/incandescent bulb
Optional colors are cool white, daylight white and warm white
360 degree wide beam floodlight
Not dimmable
0.59 inch diameter x 1.73 inch total length
For use in ceiling lights, pendant lights, desk lamps, table lights, puck lights, under-counter lights, closet lights, under-cabinet lights, accent lights or display lighting etc.
The package includes 5 pcs bulbs
Non-Weatherproof. Indoor use only unless contained within weatherproof housing.
Oversize. Will not fit all fixtures. Please check the bulb dimension.

Starting at $17.99

... more info

High Power COB LED - 10W - Cool White

Part Number: HL-10W-CW

DC Forward Current: Typ. 1000mA ( 1A )
DC Forward Voltage: 10V Min. ~ 12V Max. ( 11V Typ. )
Power Consumption: 10 Watts
Emitting Color(s): Cool White rated at 6000K
Luminous Flux up to 800 Lumens
View Angle of Half Power is 140 Degree
Operation Temperature: -20℃ ~ 50℃
Storage Temperature: -20℃ ~ 100℃
Soldering Temperature: 260℃ within 5 Seconds
Additional Heatsink is required when operation temperature is higher than 50℃
Additional aluminum heatsink and fans work together to make leds perform better
Extra Constant Current LED Driver is required to drive the LED
Please install and operate the LED as per specifications and instructions
Damage from improper installation or abuse will invalid warranty
Qualified electricians who are familiar with LEDs are highly recommended

Starting at $9.95

... more info

TRIAC/Phase-cut Dimmable LED Driver Transformer - Enclosed LED Power Supply - Constant Voltage - 12V DC - 2.5A - 30W

Part Number: PS-12LPS30-WJV2

Input: AC 100-277V (±0.5V), 50/60Hz.
Output: 12 Volt DC, 2.5 Amps, 30 Watts.
Dimensions: 350*77*26mm (L*W*H).
Efficiency: 79% (Typ.) @ full load.
Power Factor: 0.99 @120V AC, 0.98 @277V AC.
Working Temperature: -40～60 degrees centigrade.
Working Humidity: 20～90%RH, non-condensing.
Storage Conditions: Temperature -40～80 degrees centigrade，Humidity 10～95% RH.
Short Circuit: Shut down o/p voltage, re-power on to recover after fault condition is removed.
Over Loading: ≤120% shut down o/p voltage, re-power on to recover.
Over temperature: 90～110 degrees centigrade shut down o/p voltage, automatically recover after cooling.
TRIAC/Phase-cut Dimmable Constant Voltage 12V DC LED Driver.
Full protection enclosed metal housing.
Certificates: UL, cUL, Class 2 and FCC approved.
Wiring Instructions: Black wire for AC L, White for AC N, Green for Ground; Red for LED +, Blue for LED - .

$59.95

10M 32.8FT - 2x 5M LED Strip Lights - 24V DC - 72W - IP65

Part Number: 5M300TAW-24V

10mm Wide x 5000mm Long x 2.5mm Height
Input Voltage is 24V DC
Total Power Consumption is 72 Watt (3.0 Amp)
Uses 300pcs Tri-chip 5050 SMD Epistar LEDs
Luminous Flux up to 5400 Lumens
Optional Colors: Warm White, Neutral White and Daylight White
Can be dimmable by our led dimmers (plus extra transformers)
Flexible Led Strip Lights
Self Adhesive Scotch Tape On the Back
Cuttable, but not encouraged, cuz improper use invalid warranty
Protection Rating is IP65 Waterproof
The Maximum Length in series can ONLY be 5 meters (16.40 ft.).
Extra LED Transformer is required to drive the led strip (using correct voltage)

$54.95

... more info

10.

Mounting Track / Holder for 3528 SMD LED Rope Light

Part Number: CM-RP-KK3528

Mounting Track / Holder for 3528 SMD Rope Light
Price is for 1pc quantity

$0.10

Displaying 321 to 330 (of 370 products)

<< Prev ... 31 32 33 34 35 ... Next >>

Navigation

Account

All Products

4-Pin Connector for 5050 SMD LED Rope Light

Dimmable Driver for 50W LED - 1500mA - DC 30-36V

10M 32.8FT - 2x 5M LED Strip Lights - 24V DC - 72W - IP33

High Power LEDs - 1W - Red - 10-Pack

RGB LED Strip Connector - 4 Contacts - 10mm - Connect Clamp - 20-Pack

Back-Pin Tower T3 JC G4 LED Bulb, 3.6 Watts, 20-25W Equivalent, 5-Pack

High Power COB LED - 10W - Cool White

TRIAC/Phase-cut Dimmable LED Driver Transformer - Enclosed LED Power Supply - Constant Voltage - 12V DC - 2.5A - 30W

10M 32.8FT - 2x 5M LED Strip Lights - 24V DC - 72W - IP65

Mounting Track / Holder for 3528 SMD LED Rope Light