All Products

Displaying 326 to 350 (of 372 products)

<< Prev ... 11 12 13 14 15 Next >>

32.8FT 10M Single Color LED Strip Tape Light, 300 SMD 5050 LEDs, 24V DC, 72 Watts, IP33 Nonwaterproof (2x 5M/Reel)

Part Number: 5M300TAD-24V

10mm Wide x 5000mm Long x 2mm Height
Input Voltage is 24V DC
Total Power Consumption is 72 Watt (3.0 Amp)
Uses 300pcs Tri-chip 5050 SMD Epistar LEDs
Luminous Flux up to 5400 Lumens
Optional Colors: Warm White, Neutral White and Daylight White
Can be dimmable by our led dimmers (plus extra transformers)
Flexible Led Strip Lights
Self Adhesive Scotch Tape On the Back
Cuttable,but not encouraged,cuz improper use invalid warranty
Protection Rating is IP33 Nonwaterproof
The Maximum Length in series can ONLY be 5 meters (16.40 ft.).
Extra LED Transformer is required to drive the led strip (using correct voltage)

Starting at $52.99

... more info

HERO-LED 1W High Power LEDs, 20mm Aluminum LED Star, Red, 10-Pack

Part Number: HL-1W-R

DC Forward Current: Typ. 350mA ( 0.35A )
DC Forward Voltage: 2.0V Min. ~ 2.8V Max. ( 2.2V Typ. )
Power Consumption: 1.0 Watts
Emitting Color(s): Red rated at 625nm
Luminous Flux up to 45 Lumens
View Angle of Half Power is 120 Degree
Operation Temperature: -20℃ ~ 50℃
Storage Temperature: -20℃ ~ 100℃
Soldering Temperature: 260℃ within 5 Seconds
Additional Heatsink is required when operation temperature is higher than 50℃
Additional aluminum heatsink and fans work together to make leds perform better
Extra Constant Current LED Driver is required to drive the LED
Please install and operate the LED as per specifications and instructions
Damage from improper installation or abuse will invalid warranty
Qualified electricians who are familiar with LEDs are highly recommended
The package includes 10 pcs LEDs.

$100.00

... more info

RGB LED Strip Connector, 4 Contacts, 10mm, Connect Clamp, 20-Pack

Part Number: LS-CNTRGB-D

Use this to connect our cut-off LED strips.
Perfect to use as corners or to change direction of the strip.
No soldering required - just push it on to make the connection.
Comes without wires.

$12.99

Back-Pin Tower T3 JC G4 LED Bulb, 3.6 Watts, 20-25W Equivalent, 5-Pack

Part Number: BTG4-18T

Input voltage is AC10-18V / DC10-30V
Power consumption is 3.6Watts
Uses 18 pcs SMD 5050 LEDs
Luminous flux up to 250 lumens maximum
Nearly equivalent to standard 20-25W halogen/incandescent bulb
Optional colors are cool white, daylight white and warm white
360 degree wide beam floodlight
Not dimmable
0.59 inch diameter x 1.73 inch total length
For use in ceiling lights, pendant lights, desk lamps, table lights, puck lights, under-counter lights, closet lights, under-cabinet lights, accent lights or display lighting etc.
The package includes 5 pcs bulbs
Non-Weatherproof. Indoor use only unless contained within weatherproof housing.
Oversize. Will not fit all fixtures. Please check the bulb dimension.

Starting at $17.99

... more info

HERO-LED 10W High Power LEDs, Cool White 6000K

Part Number: HL-10W-CW

DC Forward Current: Typ. 1000mA ( 1A )
DC Forward Voltage: 10V Min. ~ 12V Max. ( 11V Typ. )
Power Consumption: 10 Watts
Emitting Color(s): Cool White rated at 6000K
Luminous Flux up to 800 Lumens
View Angle of Half Power is 140 Degree
Operation Temperature: -20℃ ~ 50℃
Storage Temperature: -20℃ ~ 100℃
Soldering Temperature: 260℃ within 5 Seconds
Additional Heatsink is required when operation temperature is higher than 50℃
Additional aluminum heatsink and fans work together to make leds perform better
Extra Constant Current LED Driver is required to drive the LED
Please install and operate the LED as per specifications and instructions
Damage from improper installation or abuse will invalid warranty
Qualified electricians who are familiar with LEDs are highly recommended

$100.00

... more info

TRIAC/Phase-cut Dimmable LED Driver Transformer - Enclosed LED Power Supply - Constant Voltage 12V DC, 2.5A, 30W

Part Number: PS-12LPS30-WJV2

Input: AC 100-277V (±0.5V), 50/60Hz.
Output: 12 Volt DC, 2.5 Amps, 30 Watts.
Dimensions: 350*77*26mm (L*W*H).
Efficiency: 79% (Typ.) @ full load.
Power Factor: 0.99 @120V AC, 0.98 @277V AC.
Working Temperature: -40～60 degrees centigrade.
Working Humidity: 20～90%RH, non-condensing.
Storage Conditions: Temperature -40～80 degrees centigrade，Humidity 10～95% RH.
Short Circuit: Shut down o/p voltage, re-power on to recover after fault condition is removed.
Over Loading: ≤120% shut down o/p voltage, re-power on to recover.
Over temperature: 90～110 degrees centigrade shut down o/p voltage, automatically recover after cooling.
TRIAC/Phase-cut Dimmable Constant Voltage 12V DC LED Driver.
Full protection enclosed metal housing.
Certificates: UL, cUL, Class 2 and FCC approved.
Wiring Instructions: Black wire for AC L, White for AC N, Green for Ground; Red for LED +, Blue for LED - .

$59.95

32.8FT 10M Single Color LED Strip Tape Light, 300 SMD 5050 LEDs, 24V DC, 72 Watts, IP65 Waterproof (2x 5M/Reel)

Part Number: 5M300TAW-24V

10mm Wide x 5000mm Long x 2.5mm Height
Input Voltage is 24V DC
Total Power Consumption is 72 Watt (3.0 Amp)
Uses 300pcs Tri-chip 5050 SMD Epistar LEDs
Luminous Flux up to 5400 Lumens
Optional Colors: Warm White, Neutral White and Daylight White
Can be dimmable by our led dimmers (plus extra transformers)
Flexible Led Strip Lights
Self Adhesive Scotch Tape On the Back
Cuttable, but not encouraged, cuz improper use invalid warranty
Protection Rating is IP65 Waterproof
The Maximum Length in series can ONLY be 5 meters (16.40 ft.).
Extra LED Transformer is required to drive the led strip (using correct voltage)

$54.95

... more info

Mounting Track / Holder for 3528 SMD Rope Light

Part Number: CM-RP-KK3528

Mounting Track / Holder for 3528 SMD Rope Light
Price is for 1pc quantity

$0.10

Mounting Track / Holder for 5050 SMD Rope Light

Part Number: CM-RP-KK5050

Mounting Track / Holder for 5050 SMD Rope Light
Price is for 1pc quantity

$0.20

10.

LED Transformers - Switching Power Supply - 12V DC, 4.17A, 50W

Part Number: PS-SW12LPS50

Input Voltage: AC 90~250V, 50/60Hz
12 Volt DC
4.17 Amps (4170mA)
50 Watt (Max.)
Protection Rating IP20
Working Temperature: -10℃~50℃
Efficiency: 85% (Typ.)
Metal Housing
Size: 110.5 x 77.4 x 36mm
CE, RoHS and FCC Approved

$13.99

11.

LED Transformers - Waterproof Power Supply 24V DC, 8.3A, 200W

Part Number: PS-WP24LPS200

Input Voltage: AC 100~240V, 50/60Hz
24 Volt DC
8.3 Amps (8300mA)
200 Watt (Max.)
Protection Rating IP68
Working Temperature: -10℃~60℃
Efficiency: 85% (Typ.)
Metal Housing
Size: 231 x 120 x 50mm
CE and FCC Approved

Starting at $59.99

12.

Back-Pin Tower T3 JC G4 LED Bulb, 4.8 Watts, 30-35W Equivalent, 5-Pack

Part Number: BTG4-24T

Input voltage is AC10-18V / DC10-30V
Power consumption is 4.8Watts
Uses 24 pcs SMD 5050 LEDs
Luminous flux up to 350 lumens maximum
Nearly equivalent to standard 30-35W halogen/incandescent bulb
Optional colors are cool white, daylight white and warm white
360 degree wide beam floodlight
Not dimmable
0.75 inch diameter x 1.73 inch total length
For use in ceiling lights, pendant lights, desk lamps, table lights, puck lights, under-counter lights, closet lights, under-cabinet lights, accent lights or display lighting etc.
The package includes 5 pcs bulbs
Non-Weatherproof. Indoor use only unless contained within weatherproof housing.
Oversize. Will not fit all fixtures. Please check the bulb dimension.

Starting at $19.99

... more info

13.

HERO-LED 3W High Power LEDs, 20mm Aluminum LED Star, Red, 10-Pack

Part Number: HL-3W-R

DC Forward Current: Typ. 700mA ( 0.7A )
DC Forward Voltage: 2.0V Min. ~ 2.8V Max. ( 2.2V Typ. )
Power Consumption: 3.0 Watts
Emitting Color(s): Red rated at 625nm
Luminous Flux up to 80 Lumens
View Angle of Half Power is 120 Degree
Operation Temperature: -20℃ ~ 50℃
Storage Temperature: -20℃ ~ 100℃
Soldering Temperature: 260℃ within 5 Seconds
Additional Heatsink is required when operation temperature is higher than 50℃
Additional aluminum heatsink and fans work together to make leds perform better
Extra Constant Current LED Driver is required to drive the LED
Please install and operate the LED as per specifications and instructions
Damage from improper installation or abuse will invalid warranty
Qualified electricians who are familiar with LEDs are highly recommended
The package includes 10 pcs LEDs.

$100.00

... more info

14.

IR Remote Controller for Wireless Induction Rechargeable Tea Light Votive Candles

Part Number: CD-RF-CT

Power by 1pc cr2025 3v lithium battery (NOT INCLUDED)
Turn on/off led candles
4-hour or 8-hour time setting
Flickering led candle or static led light setting
60% or 100% 2-level brightness setting
Compact size 88*33*6mm
CE and RoHS Compliant

Starting at $3.95

... more info

15.

TRIAC/Phase-cut Dimmable LED Driver Transformer - Dimmable LED Power Supply - AC 100-277V to Constant Voltage 12V DC, 5A, 60W

Part Number: PS-12LPS60-WL

Input: AC 100-277V (±0.5V), 50/60Hz.
Output: 12 Volt DC, 5 Amps, 60 Watts.
Dimensions: 300*32*20mm (L*W*H).
Efficiency: 83% (Typ.) @ full load.
Power Factor: 0.98 @120V AC, 0.98 @277V AC.
Working Temperature: -40～60 degrees centigrade.
Working Humidity: 20～90%RH, non-condensing.
Storage Conditions: Temperature -40～80 degrees centigrade，Humidity 10～95% RH.
Short Circuit: Shut down o/p voltage, re-power on to recover after fault condition is removed.
Over Loading: ≤120% shut down o/p voltage, re-power on to recover.
Over temperature: 90～110 degrees centigrade shut down o/p voltage, automatically recover after cooling.
TRIAC/Phase-cut Dimmable Constant Voltage 12V DC LED Driver.
Full protection enclosed metal housing.
Certificates: UL, cUL, Class 2 and FCC approved.
Wiring Instructions: Black wire for AC L, White for AC N, Green for Ground; Red for LED +, Blue for LED - .

$79.95

16.

LED Transformers - Switching Power Supply - 12V DC, 8.3A, 100W

Part Number: PS-SW12LPS100

Input Voltage: AC 110~220V, 50/60Hz
12 Volt DC
8.3 Amps (8300mA)
100 Watt (Max.)
Protection Rating IP20
Working Temperature: -10℃~50℃
Efficiency: 85% (Typ.)
Metal Housing
Size: 200 x 92 x 37.4mm
CE, RoHS and FCC Approved

Starting at $29.95

17.

Tail Cap for 3528 SMD Rope Light

Part Number: CM-RP-TC3528

Tail Cap for 3528 SMD Rope Light
Price is for 1pc quantity

$0.10

18.

Tail Cap for 5050 SMD Rope Light

Part Number: CM-RP-TC5050

Tail Cap for 5050 SMD Rope Light
Price is for 1pc quantity

$0.20

19.

Side Pin T3 JC G4 LED Bulb, 1.2 Watts, 10W Equivalent, 5-Pack

Part Number: SG4-6T

Input voltage is AC10-18V/DC10-30V
Power consumption is 1.2 Watts
Uses 6 pcs SMD 5050 LEDs
Luminous flux up to 120 lumens maximum
Nearly equivalent to standard 10W halogen/incandescent bulb
Optional colors are cool white, daylight white and warm white
120 degree wide beam floodlight
Not dimmable
0.94 inch diameter x 1.45 inch total length
For use in ceiling lights, pendant lights, desk lamps, table lights, puck lights, under-counter lights, closet lights, under-cabinet lights, accent lights or display lighting etc.
The package includes 5 pcs bulbs
Non-Weatherproof. Indoor use only unless contained within weatherproof housing.

Starting at $12.99

... more info

20.

Dimmable LED Constant Voltage Power Supply - Dimmable LED Transformer - 12V DC, 6.7A, 80 Watts

Part Number: PS-12LPS80-TDH

Input: AC 200-240V (±0.5V), 50/60Hz.
Output: 12 Volt DC, 6.7 Amps, 80 Watts.
Dimensions: 230*70*43mm (L*W*H).
Efficiency: 80% (Typ.) @ full load.
Power Factor: 0.95 @240V
Working Temperature: -40～60 degrees centigrade.
Working Humidity: 20～90%RH, non-condensing.
Storage Conditions: Temperature -40～80 degrees centigrade，Humidity 10～95% RH.
Short Circuit: Shut down o/p voltage, re-power on to recover after fault condition is removed.
Over Loading: ≤120% shut down o/p voltage, re-power on to recover.
Over temperature: 90～110 degrees centigrade shut down o/p voltage, automatically recover after cooling.
TRIAC/Phase-cut Dimmable Constant Voltage 12V DC LED Driver.
Full protection enclosed metal housing.
Certificates: CE, TUV, SAA and RoHS approved.
Wiring Instructions: Black wire for AC L, White for AC N, Green for Ground; Red for LED +, Blue for LED - .

$109.95

21.

10.5mm Mounting Clip with Screws, 50-Pack

Part Number: LS-CP10

Size: 6.4 x 5.5 x 29.4mm
The slot width is 10.5mm where led strips fit into
Silicon mounting clip for waterproof flexible LED strips
Srew holes are finished for easy mounting
2 screws per clip are included

Starting at $6.99

22.

LED Transformers - Switching Power Supply - 12V DC, 16.7A, 200W

Part Number: PS-SW12LPS200

Input Voltage: AC 110~220V, 50/60Hz
12 Volt DC
16.7 Amps (16700mA)
200 Watt (Max.)
Protection Rating IP20
Working Temperature: -10℃~50℃
Efficiency: 85% (Typ.)
Metal Housing
Size: 200 x 100 x 44mm
CE, RoHS and FCC Approved

Starting at $32.99

23.

RB Power Wire, Two Conductors, 10 Meters (32.8 Feet)

Part Number: LS-WRB-10M

Conductor Standard: 2 Cores
Conductor Quantity: 1 Pc(s)
Wire Diameter: 1.5mm x 3mm
Wire Length: 10M (32.8 ft.)
Maximum Load Current: 3.0 Amps
Maximum Voltage: 250 Volt

Starting at $5.99

24.

Side Pin T3 JC G4 LED Bulb, 1.8 Watts, 15W Equivalent, 5-Pack

Part Number: SG4-9T

Input voltage is AC10-18V/DC10-30V
Power consumption is 1.8 Watts
Uses 9 pcs SMD 5050 LEDs
Luminous flux up to 150 lumens maximum
Nearly equivalent to standard 15W halogen/incandescent bulb
Optional colors are cool white, daylight white and warm white
120 degree wide beam floodlight
Not dimmable
1.10 inch diameter x 1.57 inch total length
For use in ceiling lights, pendant lights, desk lamps, table lights, puck lights, under-counter lights, closet lights, under-cabinet lights, accent lights or display lighting etc.
The package includes 5 pcs bulbs
Non-Weatherproof. Indoor use only unless contained within weatherproof housing.

Starting at $14.99

... more info

25.

Dimmable LED Constant Voltage Power Supply - Dimmable LED Transformer - 12V DC, 16.7A, 200W

Part Number: PS-12LPS200-TDH

Input: AC 100-240V (±0.5V), 50/60Hz.
Output: 12 Volt DC, 16.7 Amps, 200 Watts.
Dimensions: 256*78*74mm (L*W*H).
Efficiency: 83% (Typ.) @ full load.
Power Factor: 0.98 @240V AC.
Working Temperature: -40～60 degrees centigrade.
Working Humidity: 20～90%RH, non-condensing.
Storage Conditions: Temperature -40～80 degrees centigrade，Humidity 10～95% RH.
Short Circuit: Shut down o/p voltage, re-power on to recover after fault condition is removed.
Over Loading: ≤120% shut down o/p voltage, re-power on to recover.
Over temperature: 90～110 degrees centigrade shut down o/p voltage, automatically recover after cooling.
TRIAC/Phase-cut Dimmable Constant Voltage 12V DC LED Driver.
Full protection enclosed metal housing.
Certificates: CE, TUV, SAA and RoHS approved.
Wiring Instructions: Black wire for AC L, White for AC N, Green for Ground; Red for LED +, Blue for LED - .

$179.95

Displaying 326 to 350 (of 372 products)

<< Prev ... 11 12 13 14 15 Next >>

Navigation

Account

All Products

32.8FT 10M Single Color LED Strip Tape Light, 300 SMD 5050 LEDs, 24V DC, 72 Watts, IP33 Nonwaterproof (2x 5M/Reel)

HERO-LED 1W High Power LEDs, 20mm Aluminum LED Star, Red, 10-Pack

RGB LED Strip Connector, 4 Contacts, 10mm, Connect Clamp, 20-Pack

Back-Pin Tower T3 JC G4 LED Bulb, 3.6 Watts, 20-25W Equivalent, 5-Pack

HERO-LED 10W High Power LEDs, Cool White 6000K

TRIAC/Phase-cut Dimmable LED Driver Transformer - Enclosed LED Power Supply - Constant Voltage 12V DC, 2.5A, 30W

32.8FT 10M Single Color LED Strip Tape Light, 300 SMD 5050 LEDs, 24V DC, 72 Watts, IP65 Waterproof (2x 5M/Reel)

Mounting Track / Holder for 3528 SMD Rope Light

Mounting Track / Holder for 5050 SMD Rope Light

LED Transformers - Switching Power Supply - 12V DC, 4.17A, 50W

LED Transformers - Waterproof Power Supply 24V DC, 8.3A, 200W

Back-Pin Tower T3 JC G4 LED Bulb, 4.8 Watts, 30-35W Equivalent, 5-Pack

HERO-LED 3W High Power LEDs, 20mm Aluminum LED Star, Red, 10-Pack

IR Remote Controller for Wireless Induction Rechargeable Tea Light Votive Candles

TRIAC/Phase-cut Dimmable LED Driver Transformer - Dimmable LED Power Supply - AC 100-277V to Constant Voltage 12V DC, 5A, 60W

LED Transformers - Switching Power Supply - 12V DC, 8.3A, 100W

Tail Cap for 3528 SMD Rope Light

Tail Cap for 5050 SMD Rope Light

Side Pin T3 JC G4 LED Bulb, 1.2 Watts, 10W Equivalent, 5-Pack

Dimmable LED Constant Voltage Power Supply - Dimmable LED Transformer - 12V DC, 6.7A, 80 Watts

10.5mm Mounting Clip with Screws, 50-Pack

LED Transformers - Switching Power Supply - 12V DC, 16.7A, 200W

RB Power Wire, Two Conductors, 10 Meters (32.8 Feet)

Side Pin T3 JC G4 LED Bulb, 1.8 Watts, 15W Equivalent, 5-Pack

Dimmable LED Constant Voltage Power Supply - Dimmable LED Transformer - 12V DC, 16.7A, 200W